|
|
 |
Brand: Alfa Laval
Stainless steel centrifugal pump.
Manufacturer | Brand: Alfa Laval.
Model: CRX 216 F.
Type: Sanitary.
Approximate flow rate: up to 10 m³/h.
Operated for 10 years.
Outlet: 2”.
The pump was used for transferring inverted sugar.
... |
|
|
 |
Brand: Alfa Laval, Tetra Pak
Stainless steel sanitary valve manifold cluster.
Composed of:
- 12 Mixproof valves | double seat valves.
Manufacturer | brand: Alfa Laval.
Mixproof valves or double seat valves are special sanitary valves used to keep two liquids complete... |
|
|
 |
Brand: Alfa Laval
Bactofugal vertical centrifuge with automatic discharge for milk clarification.
Manufacturer: Alfa Laval.
Model: BB-10 HGV.
Approximate hydraulic flow rate: 10,000 L/H.
Approximate flow rate for bacteria removal: 5,000 L/H.
Year: 2017.... |
|
|
 |
Brand: Alfa Laval
Components: SEW-Eurodrive
Lobe pump in 316 stainless steel.
Manufacturer: Alfa Laval.
Motor: 7.5 Kw, manufacturer: Sew-Eurodrive.
Model: SRU4 / 055 / LS.
Year: 2017.
Voltage: 460 V.
Amperage: 12.30 A.
Three-phase.
Protection rating: IP 55.
R.P.M: 17... |
|
|
 |
Brand: Alfa Laval
Components: SEW
Lobe pump in 316 stainless steel.
Manufacturer's brand: Alfa Laval.
Motor: 11 kW.
Year: 2011.
Internal diameter of product inlet/outlet: approximately 77 mm 78 mm. Check photos of the caliper.
Positive test for 316 stainless steel reag... |
|
|
 |
Brand: Alfa Laval
Components: SEW
Lobe pump in 316 stainless steel.
Manufacturer's brand: Alfa Laval.
Motor: 7.5 kW.
Internal diameter of product inlet/outlet: approximately 46 mm 48 mm. Check photos of the caliper.
Positive test for 316 stainless steel reagent. Check pho... |
|
|
 |
Brand: Alfa Laval
Plate heat exchanger.
Stainless steel.
Brand: Alfa Laval.
Model: M3 - FHC.
Maximum working pressure: 1.0 MPa / 10.0 Bar.
Maximum working temperature: 110 ° C.
Volume: 3 L.... |
|
|
 |
Brand: Alfa Laval
Stainless steel cooling tank.
Brand: ALFA LAVAL.
Approximate capacity: 1000L.... |
|
|
 |
Brand: Alfa Laval
System for heating thermal fluid.
Brand: Alfa Laval, Aalborg.
Model: 25 - HO- 25M.
Year: 2009.
Thermal capacity: 2,500 Kcal / Hour.
Volumetric capacity: 2175 liters.
P.M.T.A: 150 Psig.
Hydrostatic Test: 225 Psig.
Category: 3.
... |
|
|
 |
Brand: Aalborg, Alfa Laval
Heater for industrial heating thermal fluid.
Brand: Alfa Laval Aalborg.
Model: 50 - HO - 50 M.
Process: Thermal fluid heater for propane refining.
Thermal capacity: - 5,000,000 KCAL/H
Volumetric capacity: 2960 Liters.
P.M.T.A - 300 ... |
|
|
 |
Brand: Alfa Laval
Skid-mounted centrifugal separator for cleaning oils from hydraulic and other similar systems.
Manufacturer: Alfa Laval.
Maximum capacity: 10.6 m³/h, depending on the product.
Model: MAB 206.
The equipment was recently overhauled and skid... |
|
|
 |
Brand: Alfa Laval
High-pressure piston homogenizer.
Manufacturer | Brand: Alfa Laval.
Model: SHL 25.
Maximum production capacity: up to 9,000 L/H at 250 bar pressure.
Refurbished.
Equipment with panel.
For the food, beverage, dairy, cosmetics, pharma... |
|
|
 |
Brand: Alfa Laval
Horizontal stainless steel centrifuge separator for separating solids and liquids in food processes.
Manufacturer | brand: Alfa Laval.
Model: NX - 418.
Approximate capacity: 10,000 liters per hour.... |
|
|
 |
Brand: Alfa Laval
Separator centrifuge separator purify industrial oils.
Manufacturer | brand: alfa laval.
Model: mab 104.
Approximate capacity: 2,200 liters per hour.
To separate fine solids and other impurities.... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifuge separator for separating animal blood phases.
Manufacturer | Brand: Alfa Laval.
Model: BPM 209.
Approximate capacity: 5,000 liters per hour.
For separating plasma and hemoglobin.... |
|
|
 |
Brand: Alfa Laval
Centrifugal separator for industrial oils.
Manufacturer | brand: Alfa Laval.
Model: MOPX 205.
Approximate capacity: 4,900 liters per hour.
For separating fine solids and other impurities.
With panel.... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifuge for food processing such as juice, beer and wine production.
Manufacturer | brand: Alfa Laval.
Model: VNPX.
Approximate capacity: 2,400 liters per hour.... |
|
|
 |
Brand: Alfa Laval
Automatic centrifugal separator.
Manufacturer: Alfa Laval.
Model: MAPX-207.
With heater, vacuum pump, mug filter, 220 / 380 / 440 V transformer, control panel and waste tank.
For treatment of mineral oils in purification, clarification, d... |
|
|
 |
Brand: Despurifil
Industrial Reverse Osmosis Water Purification System.
Manufacturer | Brand: Despurifil.
Model: DES-806.
Approximate production: up to 8,000 liters.
Permeate production: 65%.
Inlet water conductivity: around 130 µs/cm.
Outlet water c... |
|
|
 |
Brand: Alfa Laval
Sanitary centrifugal pump in 316 stainless steel.
Manufacturer brand: Alfa Laval.
Model: Solidc model 1.0150 RSS 10 hp.
Flow: 35 m³/h.
Pressure: 2.5 or 2.6 bar.
It was probably part of an Alfa Laval Jet Mix mixing system.
Quantity: ... |
|
|
 |
Brand: Alfa Laval
Sanitary centrifugal pump in 316 stainless steel.
Manufacturer brand: Alfa Laval.
Model: Solidc model 1.0150 FSS 10 hp.
Flow: 35 m³/h.
Pressure: 2.5 or 2.6 bar.
It was probably part of an Alfa Laval Jet Mix mixing system.
Quantity: ... |
|
|
 |
Brand: Alfa Laval, Ata
fermenteira 01 1500 l with reg. 2
01 fermenteira 1000 l with reg. 2
01 fermenteira 500 l with reg. 2 02 sanitary pumps 2hp/2
01 strip 2
01 alfalaval expansion tank with NG 2 s/refrig unit. (740L)
01 reception tank 300 l with reg. 2 with lid... |
|
|
 |
Brand: Alfa Laval, Endress Hauser, Netzsch, Tetra Pak
Components: Danfoss
Complete line for pasteurization.
Brand: Tetra Pak.
Spiraflow.
Type: C - 118.
Capacity: 14,300 liters per hour.
Negative pressure deaeration tank.
Conductivity meter.
Brand: Endress Hauser.
Heat exchanger.
Brand: Alfa Laval... |
|
|
 |
Brand: Alfa Laval
Stainless steel triblender.
Brand: Alfa Laval.
Model: Tri-Clover F4329MD-MBV-S.
Engine: 20 hp.
Application:
System for Mixing Dry / Liquid Ingredients in Sanitary Conditions.
The Mixer provides fast and uniform mixing in continuous or b... |
|
|
 |
Brand: Alfa Laval, Brasholanda, Westfalia
Complete set 7500 litres pasteurizer with a sanitary pump, with all interconnection pipes in.
consisting of:
Compressor Maicon ammonia c. 2 all revised.
8.65 Sabroe Compressor with motor 40 cv, any revised.
evaporative Condenser 100,000 kcal ... |
|
|
 |
Brand: SG Bombas
- Water pump.
- Brand: SG Pumps and Equipment LTDA.
- Model: CH - 40.... |
|
|
 |
Brand: Netzsch
- Transfer pump with helical axle for liquid and pasty product.
- Stainless steel interior.
- With motor and reducer.
- Origin: multinational pharmaceutical industry.... |
|
|
 |
Brand: Sterling Sihi
- Pump, modular vacuum system.
- Brand: Sterling Sihi / Flowserve
- Model: PL 126 M 10 0A
- Complete technical description of equipment and manual:
| |
|
 |
Brand: Jormary
Gear pump.
Stainless steel.
With panel, stand.
With 1 valve in the support for compressed air.
Gear pump.
With Weg brand motor.... |
|
|
 |
Brand: Bauch Campos, Delgo, Novelprint
Line for the manufacture of glue and packaging of 40 g / 90 g / 500 g / 1000 g consisting of:
- Mixer without shirt for glue and solution.
- Mixer with jacket and heating to make alcohol solution poliv.
- Automatic packaging machine, year 2013.
... |
|
|
 |
Brand: Plumat
- Transfer pump in sanitary stainless steel.
- Brand: Plumat.
- Manufacture: German.
- q 7.8 m 3 / hr.
- 44.57 m.
- Power: 5.5 Kw - n 2,900 min.
- 2 m 2.... |
|
|
 |
Brand: WEG
Components: WEG
- Water pump.
- Pump with reducer and support for the propeller assembly.
- Serial Number: r17544.
- Model: C216F
RPM: 1725.
- WEG engine.
- Voltage 220 / 380v.... |
|
|
 |
Brand: Sollich
Chocolate pump.
Brand: Sollich.
Model: STP6000.... |
|
|
 |
High pressure pump, Eric Murphy's phone.
Parts in contact with product manufactured in 316 stainless steel.
2 input SMS, SMS 1.1/4 output.
80 bar safety valve.
9 KW engine.
Cast-iron shaped body coated with anti-corrosion epoxy paint.
Sta... |
|
|
 |
Brand: Artepeças
Homogenizer with stainless steel pump.
Brand Name: Artepeças.
In perfect working order.... |
|
|
 |
Brand: Cesi
Transfer pump.
Cesi.... |
|
|
 |
Homogenizadora high shear pump, p/General, creams or cosmetics.
Has a three-phase motor of 5 HP is all stainless.
... |
|
|
 |
Brand: Tetra Laval Food Hoyer
High pressure cylinder homogenizer.
Brand: Tetra Laval Food Hoyer.
Capacity: 1000 liters / hour.... |
|
|
 |
Brand: Paem
Vacuum pump.
Panem brand.
Engine 1 CV, 550mg, air 40 m³ / h.... |
|
|
 |
Brand: Hilge
Stainless steel transfer pump
Brand: Hilge
Model: Euro Hixgia - 1 - Bloc - Super
Serial Number: 72/10/202804 - sap. 96757085
Q 7.0 m 3 / hr H 43 M.
P 5.5 Kw-N 2.900 min.
2m2... |
|
|
 |
Fluid transport system with centrifugal pump in stainless steel-Unilever Origin
... |
|
|
 |
Brand: Niro Soave
Homogenization pump 500 liters per hour Mark Niro Soave ideal for products
Lactos or others.... |
|
|
 |
Brand: SPX, Watson
Peristaltic pump-stainless steel Supplier SPX Watson... |
|
|
 |
Pumping system with motor, reducer, panel and pump in stainless steel.
For pasty products.
3.2 CV.
1600 rpm.
160 volts.
With transformer for 280 volts.... |
|
|
 |
Brand: Laybolt, Selovac
Stainless steel tank.
500 litres capacity of double wall with thermal oil heating in 6 levels.
Tank for high vacuum and pressure up to 6 kg per cm square with agitator and with speed reducer.
With double mechanical seal for vacuum and pressur... |
|
|
 |
System for baking caramel sweets hard vacuum.
With vacuum pump and pump for product extraction.
Dimensions:
Length: 4 m.
Width: 2.75 m.
Height: 2.75 m.... |
|
|
 |
Pumps for chocolates.... |
|
|
 |
Plastic Centrifuge pump
Centrifugal Pump Bomax Max model 071/Bloc 2
25 HP Motor 2 p 04002303707
No. ... |
|
|
 |
Homogenization pump.... |
|
|
 |
Brand: FPS
Components: Lafert
Gear pump with dosing hopper.
Equipment built in stainless steel.
Brand: Food Process Solutions, Italian FPS.
Voltage: 380 V.
Frequency: 60 Hz.
Power: 1/1 Kw.... |
