|
|
|
| Forming and filling of brick pouch Volpak |
|
Forming and filling of brick pouch Volpak.
Model: SB170.
Technical data:
-format to:
minimum: 120 mm x 100 mm x 50 mm.
Maximum 155 mm x 243 mm x 68 mm.
-maximum Volume: 1200.
-speed: 60 you have.
-container/Material: term.
-results: coil diameter 500 mm.
-maximum width: 745.
Nucleo: 150/152.
Electrical data: 220/380/480 V-50, 60 Hz.
noise level: less than 70 db below/.
Dimensions: 4000 x 8300 mm x 2400 mm. |
Brand:
Volpak
|
|
|
Main applications:
Automation
Food industry
Soda manufacturing, guarana, juice, mineral water
|
|
Main suggestions:
|
|
 |
Machine for candy to put in the bag
Mixer with two axles
complete line of Dairy
Tube
Packinghouse to 15 Kg
3-wire machine mechanical Stretcher screens with a maximum capacity of 40 cm, 4 x 4 Carousel machine
machine to make baby socks, ... |
|
|
 |
Brand: Bausch
Rotary filling machine with sealer and depyrogenation and sterilization tunnel for injectable glass ampoules in 316L stainless steel.
Comprises:
- Automatic rotary filling machine and sealer for glass ampoules for human injection lines.
Manu... |
|
|
 |
Brand: Bausch
Automatic rotary filling and sealing machine for glass ampoules for human injection lines.
Manufacturer | Brand: Bausch.
Model: 506.
Year: 2022.
Nominal production capacity: up to 24,000 items per hour, depending on the ampoule size.
E... |
|
|
 |
Brand: Dinieper, ERCA, Ima
Line for producing yogurt trays, dairy drinks or pasty sweets.
FFS system, forming, filling and sealing.
Manufacturer brand: IMA ERCA Dinieper Arcil.
Model: FFS 470.
Production: 25 strokes per minute.
Format: 12 glasses of 100 ml.... |
|
|
 |
Equipment for filling, assembling wafer blocks, and pressing.
Cream applicator, creamer, contact-filler, wafer block former, and wafer block press/compactor.
The cream is transferred to the wafer plate by physical contact using rollers. Pressin... |
|
|
 |
Brand: SUPREMAX
Line for manufacturing puff pastry cookies or butters.
Approximate capacity: 120 units/minute.
Line consisting of:
- Mixer and kneader for dough and fillings.
Approximate capacity: 75 kg.
Year: 12/2022.
Imported from China.
- Rol... |
|
|
 |
Machine for forming dough with or without filling.
The equipment was used for puff pastry.
Model: HD-988A.
Approximate capacity: 20 to 120 units per minute.
Year: 12/2022.
Equipment imported from China.
The dough sheet enters the eq... |
|
|
 |
Brand: Blipack
Components: Allen-Bradley, Delta, WEG
Thermoforming blister packer for capsule and tablet blisters.
With electronic control and bath retrofit.
Automatic blister machine with 304 stainless steel casing.
Manufacturer: Blipack.
Model: 203.
With intermediate station for finish... |
|
|
 |
Brand: Thermoforming
Styling of composite equipment vascas, enchedeira with possibility for 2 products, mould with eight cavities, lid sealer, cutter and packaging of the product ready.... |
|
|
 |
Brand: Thermoforming
Bottling line for trademark Termoforming pots (Italy), for packing food type creams "io io cream", with thermoforming system, aluminium seal with pneumatic filling system for the line... |
|
|
 |
Brand: Dinieper, Synerlink
Components: Danfoss, Festo, SEW, SEW-Eurodrive
Automatic FFS (Form Fill Seal Machine) thermoforming machine for yogurt pot trays and food products.
Manufacturer: Synerlink Dinieper.
Model: DN 550.
Year: 2019.
Formatting: 63 mm x 63 mm pots.
Volumetric dosing system: 80 g to 150 g.
... |
|
|
 |
Brand: Bisignano
In-line thermoforming filling and sealing machine for fruit and dairy drinks of the FFS type.
Manufacturer: Bisnago.
More information coming soon.... |
|
|
 |
Line for producing yogurt trays, dairy drinks or pasty sweets.
Manufacturer brand: IMA ERCA Spain.
FFS system, forming, filling and sealing.
Model: FFS Erca RK4 machine.
Production: 30 strokes per minute.
Formatting: 24 cups per stroke... |
|
|
 |
Line for producing yogurt trays, dairy drinks or pasty sweets.
Manufacturer brand: IMA ERCA Dinieper.
FFS system, forming, filling and sealing.
Model: FFS Erca RK3 Machine.
Production: 27 strokes per minute.
Formatting: 18 cups per str... |
|
|
 |
Brand: ERCA, Ima
Line for producing yogurt trays, dairy drinks or pasty sweets.
Manufacturer brand: IMA ERCA Dinieper.
FFS system, forming, filling and sealing.
Model: FFS Erca RK3.
Production: 27 strokes per minute.
Formatting: 24 cups per stroke.
... |
|
|
 |
Brand: Thermoforming
Stainless steel pneumatic filling with 12 nozzles for creams
This machine is part of thermoforming line, which produces pots and makes.... |
|
|
 |
Brand: Toledo
Can filling line for powder products.
It was used to fill cans of powdered milk.
Approximate capacity: from 80 to 100 cans / minute.
For cans with a diameter of 198 mm.
For more information, get in touch.
Line composed of:
- Depalat... |
|
|
 |
Brand: Dal Mak
Complete line for packaging window frames, metal profiles and carpets.
Brand: Dal Mak.
Composed by:
Product entrance mat.
Sealer for thermo shrinkable film, with side sealing (U-sealing), special for saving films (when the L-sealing is pu... |
|
|
 |
Brand: Graver
Inkprint-3 Colors-Mark Graver k12k *
* 01 GIPVI-3 c Set (3 colors), for 1.20 m wide, Molded Cookie decorated, composed of:
01 molder Cylinder, mark Graver, CMG, model with forms in bronze without teflon, to Cookie square, round or rectangular, w... |
|
|
 |
Brand: Zirtec Proceco
Washing machine plastic boxes.
Brand Name: Proceco Zirtec.
Model: MBCW24X16.
Purpose: industrial Washing of plastic boxes for packaging of parts (average capacity of 10,000 boxes/day)
size:
-length: 9.1 m.
-width: 2.7 m
-height: 2.52 m ... |
|
|
 |
Brand: Wada
Stainless steel Rotary filling for liquid and Pasty products.
With 6 filling nozzles and thread cutting and forming.
With electronic control of production and packaging.... |
|
|
 |
2 Filling and lipstick sample forming.
10,000 hour capacity
Carimbador Oscar topographic Flues.
With frequency inverter source Avon.... |
|
|
 |
Brand: Dinieper
Components: ABB, Altronic, Contemp, Festo, OMRON, SEW-Eurodrive, Siemens
Thermoforming machine for pvc and aluminum yoghurt trays.
Brand: Dinieper.
Model: DINI 250-M.
For thermoforming and filling of yogurt trays with 6 pots and 2 flavors.
Cycles: 21/minute – trays.
Equipment entirely in stainless steel.
... |
|
|
 |
Brand: Brasforno, Cozil, Haas, Icaterm, Klainox, Tecnomecal
Components: Bitzer, Brahma, Danfoss, Dungs, Hofomat, Siemens
Line for making empanadas.
Brand Name: Tecnomecal.
Composed by:
Forming of empanadas.
Brand Name: Tecnomecal.
Model: ML-300.
Lamination of two seasons.
Brand Name: Tecnomecal.
Model: 600.
Two cylinders of imported mass Argenti... |
|
|
 |
Brand: Magopac
Soft belly packer for liquids.
Stunning soft belly.
Manufacturer: Magopac.
For sachets from 150 ml to 1.5 liters.
Approximate capacity: from 500 to 700 units per hour.*
*depending on product and viscosity.
Year: 2020.
The equipment... |
Others suggested equipment for you:
|
|
 |
Brand: J.G Equipamentos de Vapor
Steam generator JG EG-16.
heat Production-193,194 Kcal/h.
Evaporation with water at 115° C-216 kg steam per hour.
steam operation pressure 150 PSI-65a.
fuel consumption.
LPG Gas-14.00 kg/h
natural Gas-17 m ³/h.
Motor-0.75 ... |
|
|
 |
Brand: Promaler
Intermittent rotary cellofanching machine.
Brand: Promaler.
Prepared to operate fully closed cartridges.
Tape application with the following dimensions: 36 mm wide x 15 mm deep x 67 mm high.
Machine can be formatted for cigarettes, haysta... |
|
|
 |
Brand: Zolimaq
Linear automatic filling machine.
Brand: Zolimaq.
Built in stainless steel.
With 6 dosing nozzles.
Accompanies another set of 6 nozzles for smaller products.
Filling machine with stainless steel centrifugal pump to pressurize the produ... |
|
|
 |
Brand: Donar, MVL
Components: WEG
With vibrating chute feeder for solid products.
Presence sensor for container packaging, moved by conveyor belt with talisca.
The equipment has two stainless steel silos, each silo has a scale/load cell and a CLP itself.
CLP brand GTA.
... |
|
|
 |
Brand: Serac
- Gravity packer for liquids.
- Machine has 1 spout.
- Machine entirely built in stainless steel.
- Brand Serac.
- Semiautomatic with dosage by electronic scale of 1 to 25 liters.
- Production of 15 / minute for packs of 1 liter.... |
|
|
 |
Coater in stainless steel tablets.
Type: Drageadeira.
With retractable head.
For approximately 150 L.
With two spray coating.... |
|
|
 |
Brand: Carle & Montanari
Temperadeira for chocolate.
Brand: Carle & Montanari.
Model: TR250.
Capacity: 400 kg per hour with 3 stages.... |
|
|
 |
Brand: Serac
- Gravity packer for liquids.
- Machine has 1 spout.
- Machine entirely built in stainless steel.
- Brand Serac.
- Semiautomatic with dosage by electronic scale of 1 to 25 liters.
- Production of 15 / minute for packs of 1 liter.... |
|
|
 |
Brand: Mesal
Filling machine 10 nozzles for wax grease high viscosity.
Brand: Mesal.
Model: MEC 500/10.
Year: 2002.
Worked with domestic wax packaging.
With 10 nozzles, individual cylinder per nozzle.
With electric panel.
Production: 5,000 bo... |
|
|
 |
Brand: Polienva Movitron
- Pneumatic dosing machine.
- Stainless steel.
- Brand: Polienva Movitron.... |
|
|
 |
Brand: Indumak
Line for mixing and packing with ribbon blender and Indumak floor:
-Packer/trademark Indumak package.
Model: MG1000.
Excellent state of conservation.
Packing type solder pad and FP 1000 feeder of Indumak, for the dosing of powders and c... |
|
|
 |
Brand: Hebleimar
Cooling tunnel for chocolates, sweets, biscuits, cereal bars.
- Brand: Hebleimar
- Voltage: 220V Three-phase;
- Components: 04 motors with respective powers 5,0 KW, two
Engines with 1.5 KW and 0.75 Kw.
- General characteristics: It ha... |
|
|
 |
Brand: Nocelli, Serac
- Lineariser with 6 nozzles.
- Machine built in stainless steel.
- Structure in good condition.... |
|
|
 |
Brand: Hebleimar
Hebleimar stainless steel knife / knife roller
- Brand: Hebleimar
- Material: Stainless steel
- Voltage: 220 V three-phase
- Components: 1 engine generating 7.2 KW of power
- General characteristics: Spacing between 30 mm rotary knives... |
|
|
 |
Brand: Nocelli
- Lineariser with 6 nozzles.
- Machine built in stainless steel.
- Structure in good condition.
- Brand: Nocelli.... |
|
|
 |
Brand: Battenfeld Pugliese
Components: Cestari
Battenfeld Blower Pugliese.
Function: production of bottles.
Used for: manufacture of detergent bottles.
Model: BPS-2.
Year of manufacture: 1996.
Capacity: 1,000 bottles per hour.
Voltage: 220 Vac/60 hz/135.
With 3 cavities moul... |
|
|
 |
Brand: Ima, Tecmar
Components: Adam, Allen-Bradley, Emerson, Gaynor, Lineartec, Schneider, WEG
Sachet with 12 ways.
Stick sachet filling machine.
Manufacturer brand: Tecmar IMA group.
Production: 50 g.p.m* (*these values vary according to the density and granulometry of the product, production may drop).
Hours of use and strokes: C... |
|
|
 |
Components: SEW-Eurodrive
- Capacity: 2,000 L.
- Made of stainless steel.
- With complete panel:
- Siemens Logo 230 RC.
- Siemens switches.
- Organized picture.
- Inverter Sew Eurodrive Movitrac LT.
- System and pneumatic key.
- The mixer has two caps,... |
|
|
 |
Brand: LCB
Filling Large.
automatic Rotary Filling mark LCB. filling nozzles 16.
Manufactured in stainless steel AISI 304
vacuum System, suitable for glass containers or bottles.
Packs any 1000 ml bottles to model.
approximately 8000 bottles productio... |
|
|
 |
Brand: Km Máquinas
Semi-automatic, benchtop, electro-pneumatic stainless steel capping machine.
Manufacturer | Brand: Km Máquinas.
Model: BA002.
Semi-automatic equipment, allows pressure adjustment, has a parts counter, and a height-adjustable column.
Power... |
|
|
 |
Brand: Narita
- BOPP labeling machine, fed balel / roll roll, for pet bottles and smaller bottles.
- Brand: Natira.
- Model: MZ 200.
- Year: 2007.
- For BOPP labels.
- Capacity for 150 bottles / minutes for current format.
- Maximum capacity: 200... |
|
|
 |
Brand: Wada
Linear piston filling Wada.
With 4 Pistons.
Filling machine can fill gel alcohol
Conveyor
Duo gravity Filling.
Mark-Wada.
Makes packages of 20 ml to 5000 ml.... |
|
|
 |
Brand: IMSB, Rodopac
Automatic Capper with 6 nozzles.
Manufacturer: IMSB.
Model: TSB 25.06
6 Nozzles.
Measures 40 mm: 1.50 mm x 1.20 mm x 2.30 mm height.
Bondone and thread plastic bottles of 850 ml.
Capacity of 150 bottles per minute.
Weight 1,100 kg.
... |
|
|
 |
NAW rotary press.
Ability to manufacture 200 paçocas per minute.... |
|
|
 |
Open pots for candy and other food products.
Encamisados all in stainless steel.
Including the structure of 600 litres.... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
