|
|
|
| Jacketed hot reactor tank for water circulation 45.000 L |
|
Jacketed hot reactor tank for water circulation.
Estimated total volume: 45.000 L.
Has jacket and thermal insulation.
With motor, reducer and blade shaft.
With control panel and frequency inverter.
With temperature sensor.
Equipment installed in line, will be disassembled and made available for sale. |
Brand:
Recinox
|
Components:
SEW-Eurodrive
|
|
|
|
Main suggestions:
|
|
 |
Brand: ALIC
Benchtop heated mixing reactor tank with jacket, made of stainless steel.
Manufacturer | Brand: ALIC.
Approximate volume: 30 liters.
Approximate internal dimensions:
Height: 310 mm.
Diameter: 380 mm.
Voltage: 220 V.
Benchtop reac... |
|
|
 |
Benchtop mixing reactor tank heated by jacket and electric resistance.
Approximate total volume: 28.9 L.
Internal dimensions:
Internal height: 300 mm.
Diameter: 350 mm.
Benchtop reactor for cosmetics, food, chemical and other applicati... |
|
|
 |
Reactor with a capacity of 700 to 800 L with the following characteristics.
Jacketed with heat insulation
Man in stainless steel and teflon scraper
Turbine at the bottom of the tank
Motor 3.0 HP
RPM
3.4 Volts
Bottom
Tapered 2 output... |
|
|
 |
Jacketed chemical reactor.
Approximate capacity: 500 liters.
Year of manufacture: 2009.
Stainless steel reactor internally.
It was only used for testing. It has been stopped for 15 years.
For products such as pre-polymer.
It has an ... |
|
|
 |
Brand: Sollich
Carbon steel jacketed tank.
Approximate capacity: 650 liters.
Manufacturer/brand: Sollich.
Hot water circulation equipment, with mixer.
Lower outlet of the product.
With motor and reducer (1:30).
Motor:
Three-phase voltage 220/38... |
|
|
 |
Storage tank maturing.
The tub tank is jacketed to circulate hot water.
Two identical units.
Fully stainless steel.
Literature: 500 L.
... |
|
|
 |
Brand: Baker Perkins
Mixer Baker Perkins in stainless steel.
Jacketed for hot or cold water.
Capacity for 500 litres.... |
|
|
 |
Brand: Claumaq
Components: Transmaq
Soap extruder for 10g to 40g soaps.
Manufacturer: Claumaq.
Jacketed extruder with heated extrusion tip.
Stainless steel extruder interior.
With Transmaq TR 7 motor and reducer.
This extruder is part of a soap line that was focused on s... |
|
|
 |
Brand: Claumaq
Machines for soap manufacturing.
The soap line was focused on meeting and outsourcing the production of soaps for hotels.
Maximum nominal production of the extrusion: 500 kg/h, depending on the size of the soap.
Production recorded for the s... |
|
|
 |
Brand: ARV, Bosch, Fabrima, Moinhos Tigre, Semco, TekPack, Tigre
Components: Coel, Dakol, Danfoss, Festo, Fotek, GWA, JHM, Parker, Siemens, Switron, Unitronics, WEG
Complete line for the manufacture of chocolate powder and other blenders.
With high automation and space optimization, compact machines with structures for verticalization (platforms, mezzanine, elevator, connections, conveyor threads, dimensioned... |
|
|
 |
Brand: Metalquim
Heated mixer (jacketed) for laboratory / pilot.
Approximate capacity: up to 20 liters.
Manufacturer | brand: Metalquim.
Electronic panel with control switches, resistance and motor, and mass and jacket controllers.
Approximate dimensions:... |
|
|
 |
Brand: Narita, VMC Máquinas
Complete line for bottling mineral water, carbonated or still drinks.
Manufacturer | Brand: VMC Máquinas.
For 500 ml bottles.*
*Can be used for up to 2 liters.
Composed of:
- Inlet air vents that leave the blower* and go to the filler.... |
|
|
 |
Brand: G.Mazzoni, Mazbra Mazzoni
Complete structure of triplex bar soap extruder.
Composed of:
- Extruder for manufacturing bar soap.
Brand | manufacturer: G.Mazzoni.
Model: Triplex.
Approximate capacity: 3,000 kg/h of bar soap.
- Internal carbon steel liquid soap ... |
|
|
 |
Brand: Chocomaq
The equipment does and fills, truffle cookie with pingadinho above, the manufacturer chocomaq, she has 12 nozzles the pot is jacketed.... |
Others suggested equipment for you:
|
|
 |
316 L stainless steel column shaker.
With engine.
It has no agitator.
Approximate dimensions:
Total height: 2050 mm. (photo 8)
Height to rod fitting: 1640 mm. (photo 9)... |
|
|
 |
Stainless steel tank with simple shirt with lid without agitator.
Capacity: 1,000 liters.
Measures:
diameter: 1000 mm.
height: 1300 mm.
overall height: 1900 mm.... |
|
|
 |
Stainless steel tank.
1000 litre capacity.
With motor and reducer.... |
|
|
 |
Brand: Implantação Engmaq
Stainless steel tank with serpentine.
Brand: Implantation Engmaq.
Capacity: 35 liters.
Area: 0,30 m2.
Pressure Design: Side / Serpentine - 3/5 Bar / man.
Design temperature: Side / Serpentine - 80/80 C.
Operating pressure: Side / Se... |
|
|
 |
Stainless steel storage tank.
500 liters capacity.
With carbon steel support.
Output of the product from the side.
With motor and propeller shaft.... |
|
|
 |
Brand: Alfa Laval
Alfa Laval sanitary transfer pump
- Pontecia: 7.5 hp - 3 phases.
- Voltage: 220/380 V.
- A 19.1 / 11.1
- Hz 60
- 3,500 rpm... |
|
|
 |
Tank insulated with refrigeration, internal in stainless steel and external in carbon steel.
Capacity of 1,300 liters.... |
|
|
 |
Stainless steel tank with internal cooling like tina.
220 litres capacity.... |
|
|
 |
Cream mixer tank Damix.
emergency Button.
-Inhibits any cream mixer tank firing.
-Fires in emergency situations and used in cleaning and maintenance.
-to activate, simply press the red button.... |
|
|
 |
Resistance heating jacketed storage tank.
Approximate capacity: 4800 liters.
In carbon steel with motor, reducer and agitator.
Approximate measurements:
Outside diameter: 2200 mm.
Inner diameter: 1850 mm.
Internal height: 1800 mm.
... |
|
|
 |
Brand: Eteq
5 vertical cylindrical Tanks in carbon steel 4000 L each.
Built for use as pressure vessels for hydrogenation of fats.
Old but never used.
Brand: Eteq.
Diameter: 1.60 m.
height: 2.00 m (feet).... |
|
|
 |
Brand: Maicon Maras
Sugar, glucose mixer to soft or hard candies brand Maras, Coolnix
model composed of 2 300 liter tanks and 1 tank 100 litres lung
... |
|
|
 |
Tanks silos jacketed of 20.000 liters each.
It was used for glucose storage.
Tapered bottom: 1.50 m.
Diameter: 2.20 m.
Feet: 2.58 m
Overall length without feet: 5.70 m.
Total length with feet: 8.40 m approximately (because there is ... |
|
|
 |
Brand: Worthington
Air reservoir.
Brand name: Worthington Industries.
For 0.85 cubic meters and pressure 8,8 kg cubic meters.... |
|
|
 |
Jacketed tank 5000 litres for chocolate-carbon steel.... |
|
|
 |
2 jacketed Tanks for reception of fat to 10 tons each.
internal finish in carbon steel insulated.... |
|
|
 |
5000 liters tank with large motor and reducer.
Externally coated stainless steel and jacketed.... |
|
|
 |
Stainless steel jacketed tank 1000 litres.... |
|
|
 |
Carbon steel silo insulated with stainless steel support.
approximately 5 1000 litres Capacity for glucose and other.
stainless steel Built-in.
total height with protection grid: 6 meters.
height of the silo with the feet: 4.85 meters.
gr... |
|
|
 |
Brand: FPS
Components: Lafert
Gear pump with dosing hopper.
Equipment built in stainless steel.
Brand: Food Process Solutions, Italian FPS.
Voltage: 380 V.
Frequency: 60 Hz.
Power: 1/1 Kw.... |
|
|
 |
Tank for 2,000 liters.
Internal jacketed tank in stainless steel.
External carbon steel
Note: Equipment missing motorbike and agitator set.... |
|
|
 |
Components: WEG
Silo with power mat.
The silo:
-mouth length: 880 mm.
-width: 800 mm.
mat Measures:
-length: 4.30 m
-width: 200 mm.
Motor 1/2 HP.
: 1720 rpm Rotation.
Brand: Weg.... |
|
|
 |
Stainless steel tank with screw and transfer pump and extraction of helical thread product.
Used for biscuit industry for storage and transport of biscuits and stuffing.... |
|
|
 |
2 Silos for storage of sugar with capacity of 10 tons each.
composed of threaded reception silo 6 meters long by 6 inches in diameter and thread 3 inch outlet diameter.... |
|
|
 |
Brand: Pavan Group
Stainless steel storage tank with a capacity of approximately 1000 litres, mark Pavan, with line control panel
... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
