|
|
 |
Brand: Neuberger
Compressor for manufacturing tablets.
Brand: Neuberger.
With 16 punctures.
Plateau 293.
Tooling size, check caliper in photo.... |
|
|
 |
Brand: Neuberger
Compression machine (compression) of pill, like pica-pa k12k *. * Mark Neuberger.... |
|
|
 |
Brand: Neuberger, Riva
Punches pens for compressors.
In stainless steel.
Dimensions of the photos.
Brand: Neuberger / Riva.... |
|
|
 |
Brand: Neuberger
Components: WEG
Rotary tablet compressor.
Brand: Neuberger.
Model: MN 20 F.
Stainless steel equipment.
Direct power to the distributor.
With funnel, funnel opening register, funnel dust inspection transparent connection, angle feeder and direct powder... |
|
|
 |
Brand: Neuberger
Components: Siemens
Rotary tablet compressor.
Brand: Neuberger.
Model: MN 43 F.
With 43 compression punches.
Production: 3700 u / min.
Type: Puncture B.
Matrix Type: BB
Maximum compressive strength: 20 TON.
Maximum insert diameter: 11 mm.
Dust... |
|
|
 |
Brand: Neuberger
Rotary tablet compressor.
Manufacturer/brand: Neuberger.
Model: MN - 2 16 punches.
Approximate capacity: up to 25,000 tablets per hour.
Used for 600 mg AZ multivitamin tablets.
Retrofit year: 2019.
The cabin was installed.... |
|
|
 |
Brand: Neuberger
Rotary tablet compressor.
Brand: Neuberger.
Model: MN 2.
Number of punches: 16.
Equipment has undergone a complete retrofit, since then it has not been used in production.
Tool type: B.... |
|
|
 |
Brand: Neuberger
Rotary tablet compressor.
Brand: Neuberger Tools.
Model: MN21.
With funnel in stainless steel.
With 16 punches.
... |
|
|
 |
Brand: Neuberger
* * Model k12k compressor Neuberger-MN 35
up to 2450 units per minute
approximate weight-1250 Kgs
array Diameter 29 m/m equipped with punches of 15 m/m.... |
|
|
 |
Brand: Neuberger
35 Neoberg compressor stations.
Not included in the machine punches and dies.... |
|
|
 |
Brand: Neuberger
Machine Compressor of tablets.
Type: Monopunção.
Type: Woodpecker.
Brand: Neuberger.
Model: Eccentric Central Media model.
Linear motion compactor with production of 3,000 cycles per hour.... |
|
|
 |
The machine is part of a line for production of SOAP g. Mazzoni.
Mat set:
1.80 m mat press input.
2.00 m mat press output.
8.00 m mat cutter output.
7.50 m mat return refining extruder.
Note: Uses for transportation of product... |
|
|
 |
Brand: G.C.Neto
Cartridge stamper.
Manufacturer / brand: C. G. Neto.... |
|
|
 |
Brand: Stokes
Remote Stoks B2 model.... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
G.Mazzoni soap extruder intermediary.
- To extrude soap and preliminarily homogenize the dough.
- With 300 mm thread and cutting system.
- Measure 2,10 in length x 1,30 in width.... |
|
|
 |
-Ribbon type Mixer Blender stainless steel 304 integer.
Ideal for food and meds.
Capacity: 2,000 litres.
Excellent condition
year: 2012.
Includes screw conveyor to transport the product straight on Packer Indumak.
Made to measure.
Engin... |
|
|
 |
Stainless steel tank with 1,500 liters with motor and reducer.
- Tank size 1,20 x 1,20 x 3,14 x 1,40: 4 = 1582 liters = 1500 liters.
- Engine of 5vc 1725 rpm.
- Motor of 220 v / 380v / 440 v.... |
|
|
 |
Stainless steel tank with mixer ...
2400 litres capacity.... |
|
|
 |
Stainless steel tank with lid.
100 litre capacity.
no motor.... |
|
|
 |
Stainless steel tank with mixer and simple.
1400 litres capacity.... |
|
|
 |
Tank insulated with refrigeration, internal in stainless steel and external in carbon steel.
Capacity of 1,300 liters.... |
|
|
 |
Brand: Alsop
Stainless steel tank with simple jacket without mixer.
Brand: Alsop.
Capacity 200 liters.
Approximate measurements:
Tank height: 74.5 cm.
Height feet: 96.5 cm.
Diameter: 62 cm.... |
|
|
 |
Brand: Imarvil
Stainless steel washer bottles, use to sterilize the product packing container to be filled.
the liquid used to wash is alcohol.
Brand: Imarvil... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: Jemak
Automatic sealer for cardboard boxes.
Sealing of the cardboard box by hot glue system, Hot Melt.
Brand: Jemak.
Model: HM 36.... |
|
|
 |
Brand: Prodismaq
- Packing machine for special products.
- Complete equipment built in stainless steel.
- It has 10 dispensing nozzles.
- The equipment was built as a special design, to pack flexible products that need support for conveyor belt, such as seru... |
|
|
 |
Stainless steel tank.
1000 litre capacity.
With motor and reducer.... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
Refining mill with 3 cylinders, 600 mm wide.
Brand: G.Mazzoni.
With equipment control panel.
Approximate dimensions:
Length: 720 mm Useful: 600 mm.
Diameter: 250 mm.
Engine: 20 HP.... |
|
|
 |
Brand: KHS
Components: Allen-Bradley
Flow Pack Packaging.
Brand: KHS
model: Pack y.
the machine was formatted for packing SOAP, before the format and size of the product is cradled 120 units/minute.
Features PLC Allen Bradley.
Simple mordent.
Part that comes in c... |
|
|
 |
Brand: Tirelli
Linear filling with 4 nozzles.
Brand: Tirelli.
Model: GVJA.
Machine to work on speed.
Imported equipment, great condition, has little time before their date of manufacture.
Sell the Tirelli labeller who was from the line (fillin... |
|
|
 |
Brand: Posimat
Positioner from plastic bottles.
Brand: Posimat.
Model: Master-20.
Serial: 8764-MXI.
Uses all kind of bottles either light or heavy, cylindrical, oval or asymmetrical, with short necks or even without a neck, as covers plans elements ... |
|
|
 |
Brand: Tecnal
- Stove for sterilization and drying.
- Manufacturer: Tecnal.
- Model: TE 397/5... |
|
|
 |
Stainless steel mixer.... |
|
|
 |
Brand: G.C.Neto
Cartridge stamper.
G.C.Neto brand.
voltage 220 model TVM-0.... |
|
|
 |
Caterpillar type soap cutter.
With 21 teeth.
Some knives are missing.
Approximate knife length: 120 mm. (photo 2)
Total width of roller track: 155 mm. (photo 32)
Maximum width of roller track adjustment: 110 mm. (photo 20 and 28)... |
|
|
 |
Conveyor screw Stainless steel
- 5 meters long.
Measures:
- Diameter: 200 mm.
- Space between fins: 120 mm.
- Shaft diameter: 100 mm.
- Engine: 7.5 hp 1715 rpm.
- With motor and reducer.... |
