|
|
 |
Brand: Himaco
Plastic injection molding machine for P.P.
Brand: Himaco.
Model: APTA ECO 250 WITH SERVO MOTOR.
Average production: 130,000 units per day.
Three-phase voltage 220 v.
Commanded by PLC.
Techmation.
Closing force from 250 tons to 28... |
|
|
 |
Plastic injection mold set.
For ABS, polystyrene or polypropylene.
For: paper towel dispensers, toilet roll and intercalated toilet, soap dish and paper towel coil towel rack.
Average cycle of 45 seconds.... |
|
|
 |
PP plastic injection mold for a gas station toy.
Plastic toy mold for injection molding.
Quantity: 2 units.
Mold dimensions: 235 x 349 x 350 mm.
Injection cycle: 20 seconds.
Productive molds manufactured in Joinville, SC.
Both molds... |
|
|
 |
Brand: Sinitron
Plastic injection molding machine.
Manufacturer | Brand: Sinitron.
Model: SYA-1300 DT.
Force: 130 tons.
Capacity: 315 cm³.
Year: 2006.
3 years in operation.
For flexible PVC products, ear protector cushions, and others.
Meetin... |
|
|
 |
Brand: Sandretto Lógica
Plastic injection molding machine for injectable parts.
Manufacturer | Brand: Sandretto Lógica.
Model: 770/220.
Capacity: 220 tons.
Year: 2004.
Still operating occasionally.
Averaging 90% of planned performance.... |
|
|
 |
Plastic injection molds.
3 units.
With 1 cavity.
Year: 2016.
Molds were developed to produce charging stations for smartphones and cell phones.
It consists of 3 lockers with to place locks.
Front cabinet.
Cavity back cover.
Lo... |
|
|
 |
Molds for injection of plastic boxes.
Steel 1100 temperadora.
A cavity.
Approximate weight: 1,500 kg.
Measures:
Width: 625 mm.
Length: 895 mm.
Total height (closed): 362 mm.... |
|
|
 |
Brand: Miotto
Brand mixer Miotto.
Mixture composed of rigid PVC or flexible capacity 200 kg/hour.
-30 HP Engine.... |
|
|
 |
njection mold for roulette toys.
Plastic toy mold for injection molding.
Injection cycle: 19 seconds.
Mold dimensions: 190 mm x 190 mm.
Quantity: 2 molds.
Injection molding of PS base and PS spinner for the roulette toy.
Both molds ... |
|
|
 |
Dryer and dehumidifier for plastic granules such as PP.
Manufacturer / brand: Siccus.
Model: Compacta plus.
Approximate capacity: 100 to 150 kg per hour.
The raw material such as plastic enters the machine, which dries and dehumidifies th... |
|
|
 |
Machine for candy to put in the bag
Mixer with two axles
complete line of Dairy
Tube
Packinghouse to 15 Kg
3-wire machine mechanical Stretcher screens with a maximum capacity of 40 cm, 4 x 4 Carousel machine
machine to make baby socks, ... |
|
|
 |
Complete industry for manufacture of thermoplastic polymers, resulting in acrylic beads made by injection moulding/extrusion.
The industry has excellent automated production line, allowing it to be produced 400 tons per month of granular acrylic,... |
|
|
 |
Professional with more than 15 years of experience in chemical industry regulations and systems.
It has a company of industrial, environmental, certifications and NBR Standards.
PROFESSIONAL SUMMARY
Professional with vast experience in Managem... |
|
|
 |
Brand: Mecanica Oriente
East 60/100 injection pump
dual digital control ... |
|
|
 |
Brand: Battenfeld
Injection molding machine.
For 180 ton.
For 1.5 kg of injection.
With new CLP, reformed machine.
Speed: 55 cycles / h.... |
|
|
 |
Mold for injection of plastic box.
Molded steel 1100 tempered.
With 1 cavity.
Estimated weight: 1,500 kg.
Measures:
Width 625 mm.
Length 895 mm.
Total height (closed): 362 mm.... |
|
|
 |
Mold for injection of plastic boxes.
Steel mold 1100 temperadora with 1 cavity.
Width: 625 mm.
Length: 895 mm.
Total height closed: 362 mm.... |
|
|
 |
Large industrial plastic injection molding machine.... |
|
|
 |
Plastic injection molding machine.
Model: JM 268.... |
|
|
 |
Brand: Battenfeld
Industrial plastic injection molding machine.
Brand: Battenfeld.
Capacity: 2000g to 500 tons.
Year: 1981.... |
|
|
 |
Brand: JASOT
Plastics injector.
Brand: Jasot.
Model: IJ 300/130.
Year: 2006.
With control system of advance and retreat signals of auxiliaries by sensors.
Columns 400mm x 400mm.
Approximate injection capacity: up to 300cm³.
Frequency: 1165 RP... |
|
|
 |
Mold for injection of plastic doors.
1100 tempered steel.
Approximate weight: 1,000 kg.
Measures:
Width: 970 mm.
Length: 1150 mm.
Height: 250 mm.... |
|
|
 |
Brand: Bras Injet
Double table plastic injection molding machine.
Brand: Bras Injet.
Model: 150 800.
Year: 2006.
Formatted to inject 600 grams at a time.... |
|
|
 |
Mold for injection of plastic spoons.
With 24 cavities.
Spoon of dessert.
Cycle: 9.0 seconds.
For central nozzle injection.... |
|
|
 |
Mold for injection of plastic bucket with 20 liters.
1100 tempered steel.
With a cavity.
Approximate weight: 800 kg.
Measurements bucket body mold:
Length 600 mm.
Radius: 510 mm.
Measures mold bucket cap:
Length 300 mm.
Rad... |
|
|
 |
Brand: Embrapac
Brand Name: Embrapac.
Model: MPF TP.
little bags with feeding mat forming.
The pull system is made by hand with suitable rubber not to mark the packaging. The correctness of the Court is automatic, the size of the bag, is performed by photo... |
|
|
 |
Brand: Posimat
- Bottle positioning machine.
- Brand: Posimat.
- Model: Master 20.... |
|
|
 |
Brand: Miotto
Miotto stainless steel cooler.
30 kg Capacity.
Cools the temperature up to 60° c.... |
|
|
 |
Brand: Posimat
Positioner from plastic bottles.
Brand: Posimat.
Model: Master-20.
Serial: 8764-MXI.
Uses all kind of bottles either light or heavy, cylindrical, oval or asymmetrical, with short necks or even without a neck, as covers plans elements ... |
|
|
 |
Blow and Injection... |
|
|
 |
Brand: Nissei
Injector/PET preform mold with injection 4 and 20.
Brand Name: NISSEI ASB.
Model: PF6-2B.
Year: 1997.
Productivity: 1200 to 1600 g/h
in the production of PET bottles of 100 ml to 2000 ml (soft drinks, wines, brandy, vinegar and others).
F... |
|
|
 |
Brand: Stokes
Stokes vacuum granulator.
Rpm: 1750.... |
|
|
 |
Micronizador of 400 kg per hour for PE and PP new micronization.
National technical assistance.... |
|
|
 |
Brand: Manesty
Granulator gum.
Brand: Manesty.... |
|
|
 |
Brand: Miotto
Granuladeira extruder for sale.
Brand: Miotto.
Capacity: Approximately 350 Kg/h
Monorosca semi new.
All new Panel.
Dry sanding.... |
|
|
 |
Brand: Fibermaq
Low pressure polyurethane injection.
Manufacturer: Fibermaq.
model: PUF 7 Basic.
voltage: 220 v.
air Consumption: 20/80 PSI PCM.
Power Consumption: 4431 Watts.
applications:
:
low density rigid foams.
flexible foams.
integral skin... |
|
|
 |
Brand: Sulpol
Poliutretano injection of Sulpol, model ST-rise of 15 with P15A Kg/min... |
|
|
 |
Ribbon mixer Banerjee, helical, in stainless steel to 600 litres.
Complete machine in good condition.... |
|
|
 |
Brand: Saip
Hard Polyurethane injection machine
k12k * High. * model:
SRL Saip Cabiate (COMO) K60-ES
N° de serie: Italian 375... |
|
|
 |
Injection.... |
|
|
 |
Brand: Borgmar, Mecanoplast
Complete extruder for emulsion resin for production of plastics into synthetic PVC.
technical details:
01 mono 120 mm screw Extruder, Borgmar brand
120 mm thread, 75 HP motor, resistors made in stainless steel for heating the plate, base made o... |
|
|
 |
Cap molds with side glasses.
We are putting on sale the molds the brand Zé da Graça, containing as main product, side glasses plastic cap (where one can consume the liquid contained in them through straws).
-Cap molding.
Plastic injection mou... |
|
|
 |
25 mm lab extruder, extrusion with degaseification of 120 mm and 80 mm with compressors for aumentoar production, vibratorias sieves in stainless steel, stainless steel, tamboreador dryers for mill knives, heated press for testing, Ribbon mixer Blade... |
