Used machines for sale
 Shell and tube exchanger
Main brands:
Ziemann Liess, Carrier, Mebrafe, MECALOR
|
| Shell and tube exchanger |
Shell and tube condenser heat exchangers are devices used in industry to transfer heat between two fluids, and are commonly used in condensation processes. They are designed to efficiently exchange thermal energy between a fluid that passes through the tubes (the internal fluid) and another fluid that circulates in the shell around the tubes (the external fluid). Below I will provide information on the usefulness and common types of shell and tube condenser heat exchangers:
What is it for:
Condensation: Shell and tube condenser heat exchangers are often used to condense vapors, transforming them back to a liquid state. This is common in industrial processes where heat recovery is essential.
Heating: In addition to condensation, these exchangers can also be used to heat a fluid using the heat released during condensation.
Cooling: In some applications, shell and tube heat exchangers are employed to cool fluids by removing heat from the internal fluid and transferring it to the external fluid.
Common Types of Shell and Tube Condenser Heat Exchangers:
Single Pass Shell and Tube Heat Exchanger: The internal fluid runs through the tubes once, going from one end of the shell to the other.
Double Pass Shell and Tube Heat Exchanger: The internal fluid passes through the tubes twice before leaving the exchanger.
Multipass Shell and Tube Heat Exchanger: There may be arrangements in which the internal fluid passes through the tubes more than twice to increase the efficiency of heat transfer.
Finned Tube Shell and Tube Heat Exchanger: The tubes have fins to increase the heat transfer area and thus improve the efficiency of the exchanger.
Vaporizer Type Shell and Tube Heat Exchanger (Reboiler): Designed specifically to vaporize a liquid, common in distillation processes.
Condenser Type Shell and Tube Heat Exchanger: Designed for condensing vapors, transforming them back to the liquid state.
Shell and Tube Heat Exchanger with U Tubes: It has U-shaped tubes, facilitating thermal expansion and cleaning.
Crossflow Shell and Tube Heat Exchanger: The internal and external fluid flow perpendicular to each other, allowing efficient heat transfer.
The choice of the type of shell and tube condenser heat exchanger will depend on the specific needs of the industrial process, the properties of the fluids involved and the operating conditions. These exchangers are essential in a variety of industries, including petrochemical, chemical, food and others, where precise temperature control is crucial. |
|
|
|
 |
Shell and tube condenser/hull heat exchanger.
Diameter: 350 mm.
Total length: 3000 mm.
Length without covers: 2500 mm.
56 inner tubes as per photo.
Tube inner diameter: 10 mm.
It had a juice system.... |
|
|
 |
Brand: Ziemann Liess, APV, Cleaver-Brooks, Filtec, Ingersoll Rand, KHS, STEINECKER
Complete Brewery Factory.
Approximate capacity: up to 10,000 bottles/hour for 600 ml bottles.
Equipment set for malt and gritz treatment, consisting of:
- Reception, cleaning and weighing.
Manufacturer | brand: ZIEMANN LIESS (Brazil).
... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
