|
|
|
| Alfa Laval SHL 25 high-pressure piston homogenizer |
|
High-pressure piston homogenizer.
Manufacturer | Brand: Alfa Laval.
Model: SHL 25.
Maximum production capacity: up to 9,000 L/H at 250 bar pressure.
Refurbished.
Equipment with panel.
For the food, beverage, dairy, cosmetics, pharmaceutical, and biotechnology industries, among others.
Low- to high-viscosity, aseptic and non-aseptic emulsions and suspensions, including pasteurized milk, UHT milk, cream, yogurt, condensed milk, ice cream mix, fruit juices, concentrates, purées, tomato pastes, seasonings, mayonnaise, sauces, and dressings. |
Brand:
Alfa Laval
|
|
|
|
|
|
Main suggestions:
|
|
 |
Brand: Alfa Laval
Components: SEW-Eurodrive
Lobe pump in 316 stainless steel.
Manufacturer: Alfa Laval.
Motor: 7.5 Kw, manufacturer: Sew-Eurodrive.
Model: SRU4 / 055 / LS.
Year: 2017.
Voltage: 460 V.
Amperage: 12.30 A.
Three-phase.
Protection rating: IP 55.
R.P.M: 17... |
|
|
 |
Brand: Alfa Laval
Skid-mounted centrifugal separator for cleaning oils from hydraulic and other similar systems.
Manufacturer: Alfa Laval.
Maximum capacity: 10.6 m³/h, depending on the product.
Model: MAB 206.
The equipment was recently overhauled and skid... |
|
|
 |
Brand: Alfa Laval
Bactofugal vertical centrifuge with automatic discharge for milk clarification.
Manufacturer: Alfa Laval.
Model: BB-10 HGV.
Approximate hydraulic flow rate: 10,000 L/H.
Approximate flow rate for bacteria removal: 5,000 L/H.
Year: 2017.... |
|
|
 |
Brand: Alfa Laval
Components: SEW
Lobe pump in 316 stainless steel.
Manufacturer's brand: Alfa Laval.
Motor: 11 kW.
Year: 2011.
Internal diameter of product inlet/outlet: approximately 77 mm 78 mm. Check photos of the caliper.
Positive test for 316 stainless steel reag... |
|
|
 |
Brand: Alfa Laval
Components: SEW
Lobe pump in 316 stainless steel.
Manufacturer's brand: Alfa Laval.
Motor: 7.5 kW.
Internal diameter of product inlet/outlet: approximately 46 mm 48 mm. Check photos of the caliper.
Positive test for 316 stainless steel reagent. Check pho... |
|
|
 |
Brand: Alfa Laval
Plate heat exchanger.
Stainless steel.
Brand: Alfa Laval.
Model: M3 - FHC.
Maximum working pressure: 1.0 MPa / 10.0 Bar.
Maximum working temperature: 110 ° C.
Volume: 3 L.... |
|
|
 |
Brand: Alfa Laval
Alfa Laval sanitary transfer pump
- Pontecia: 7.5 hp - 3 phases.
- Voltage: 220/380 V.
- A 19.1 / 11.1
- Hz 60
- 3,500 rpm... |
|
|
 |
Brand: Alfa Laval
Stainless steel cooling tank.
Brand: ALFA LAVAL.
Approximate capacity: 1000L.... |
|
|
 |
Brand: Alfa Laval, Tetra Pak
Stainless steel sanitary valve manifold cluster.
Composed of:
- 12 Mixproof valves | double seat valves.
Manufacturer | brand: Alfa Laval.
Mixproof valves or double seat valves are special sanitary valves used to keep two liquids complete... |
|
|
 |
Brand: Alfa Laval
System for heating thermal fluid.
Brand: Alfa Laval, Aalborg.
Model: 25 - HO- 25M.
Year: 2009.
Thermal capacity: 2,500 Kcal / Hour.
Volumetric capacity: 2175 liters.
P.M.T.A: 150 Psig.
Hydrostatic Test: 225 Psig.
Category: 3.
... |
|
|
 |
Brand: Aalborg, Alfa Laval
Heater for industrial heating thermal fluid.
Brand: Alfa Laval Aalborg.
Model: 50 - HO - 50 M.
Process: Thermal fluid heater for propane refining.
Thermal capacity: - 5,000,000 KCAL/H
Volumetric capacity: 2960 Liters.
P.M.T.A - 300 ... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifugal pump.
Manufacturer | Brand: Alfa Laval.
Model: CRX 216 F.
Type: Sanitary.
Approximate flow rate: up to 10 m³/h.
Operated for 10 years.
Outlet: 2”.
The pump was used for transferring inverted sugar.
... |
|
|
 |
Brand: Alfa Laval
Horizontal stainless steel centrifuge separator for separating solids and liquids in food processes.
Manufacturer | brand: Alfa Laval.
Model: NX - 418.
Approximate capacity: 10,000 liters per hour.... |
|
|
 |
Brand: Alfa Laval
Separator centrifuge separator purify industrial oils.
Manufacturer | brand: alfa laval.
Model: mab 104.
Approximate capacity: 2,200 liters per hour.
To separate fine solids and other impurities.... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifuge separator for separating animal blood phases.
Manufacturer | Brand: Alfa Laval.
Model: BPM 209.
Approximate capacity: 5,000 liters per hour.
For separating plasma and hemoglobin.... |
|
|
 |
Brand: Alfa Laval
Centrifugal separator for industrial oils.
Manufacturer | brand: Alfa Laval.
Model: MOPX 205.
Approximate capacity: 4,900 liters per hour.
For separating fine solids and other impurities.
With panel.... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifuge for food processing such as juice, beer and wine production.
Manufacturer | brand: Alfa Laval.
Model: VNPX.
Approximate capacity: 2,400 liters per hour.... |
|
|
 |
Brand: Alfa Laval
Automatic centrifugal separator.
Manufacturer: Alfa Laval.
Model: MAPX-207.
With heater, vacuum pump, mug filter, 220 / 380 / 440 V transformer, control panel and waste tank.
For treatment of mineral oils in purification, clarification, d... |
|
|
 |
Brand: Despurifil
Industrial Reverse Osmosis Water Purification System.
Manufacturer | Brand: Despurifil.
Model: DES-806.
Approximate production: up to 8,000 liters.
Permeate production: 65%.
Inlet water conductivity: around 130 µs/cm.
Outlet water c... |
Others suggested equipment for you:
|
|
 |
Brand: Sterling Sihi
- Pump, modular vacuum system.
- Brand: Sterling Sihi / Flowserve
- Model: PL 126 M 10 0A
- Complete technical description of equipment and manual:
| |
|
 |
Brand: Polienva Movitron
- Pneumatic dosing machine.
- Stainless steel.
- Brand: Polienva Movitron.... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Stainless steel tank with internal cooling like tina.
220 litres capacity.... |
|
|
 |
Brand: ACG, Almapal, Pam Pac
- Blistadeira.
- Brand: Pam Pac.
- Model: Cartoblis.
- Machine for manufacturing blister packs / medicine trays.
- It has tool set for different sizes and formats.
- Excellent condition.
- Machine formatted to work with alu + PVC.... |
|
|
 |
Brand: Martinez taboada
Filling machine for vials and flasks with stopper.
Brand: Martinez Taboada.
Model type: Ife 77.
Makes up to 30 ml.
Year: 1979.... |
|
|
 |
Brand: G.C.Neto
Cartridge stamper.
G.C.Neto brand.
voltage 220 model TVM-0.... |
|
|
 |
Stainless steel storage tank.
500 liters capacity.
With carbon steel support.
Output of the product from the side.
With motor and propeller shaft.... |
|
|
 |
Stainless steel tank.
1000 litre capacity.
With motor and reducer.... |
|
|
 |
Brand: Promaler
Intermittent rotary cellofanching machine.
Brand: Promaler.
Prepared to operate fully closed cartridges.
Tape application with the following dimensions: 36 mm wide x 15 mm deep x 67 mm high.
Machine can be formatted for cigarettes, haysta... |
|
|
 |
Brand: Ethik Technology, Nova ética
Laboratory climate chamber.
Model: 400 / 7D - 300.
Serial Number: 11110/06.
Power supply: 220 V 60 Hz.
Power: 3750 W.
Literature: 5457... |
|
|
 |
Brand: Km
- Electropneumatic Batoqueira
- Brand: Km machines.
- Model: (BA002)
- Made of stainless steel. Semiautomatic equipment, allows pressure adjustment, has counter parts, column with height
adjustable.
- Machine of easy handling and low ... |
|
|
 |
Brand: G.C.Neto
Cartridge stamper.
Manufacturer / brand: C. G. Neto.... |
|
|
 |
Tank insulated with refrigeration, internal in stainless steel and external in carbon steel.
Capacity of 1,300 liters.... |
|
|
 |
Filter sparkler.
Stainless steel.
Capacity: 50 liters.
With pump.... |
|
|
 |
Brand: Imarvil
Stainless steel washer bottles, use to sterilize the product packing container to be filled.
the liquid used to wash is alcohol.
Brand: Imarvil... |
|
|
 |
Jacketed stainless steel pressure reactor.
With motor, reducer and scraper shaft.
Approximate capacity: up to 200 liters.
For mixing homogenization of products such as cosmetics, chemicals, among others.
Equipment internally in stainless ... |
|
|
 |
Brand: Blipack
Components: Allen-Bradley, Delta, WEG
Thermoforming blister packer for capsule and tablet blisters.
With electronic control and bath retrofit.
Automatic blister machine with 304 stainless steel casing.
Manufacturer: Blipack.
Model: 203.
With intermediate station for finish... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
Refining mill with 3 cylinders, 600 mm wide.
Brand: G.Mazzoni.
With equipment control panel.
Approximate dimensions:
Length: 720 mm Useful: 600 mm.
Diameter: 250 mm.
Engine: 20 HP.... |
|
|
 |
Brand: Paludo
Packing machine pills.
Brand: Paludo.
Modelo: MPE strip.... |
|
|
 |
Brand: Paludo
Sacheteira Padhi MP model 10 g
height 2 m Height x 1.10 Width x length 1.80 m... |
|
|
 |
Brand: APV
2-stage heat exchanger plates 0.84 mm height 41.... |
|
|
 |
Brand: Jones
Jones and press coolant reservoir... |
|
|
 |
Brand: Buhler
Pneumatic conveyor for powders and particles.
Compressor for transporting dust, sugar, flour and others.
Approximate capacity of 8 tons / hour.
We also have a smaller one available with a capacity of 5 tons / hour.... |
|
|
 |
Brand: APV
Heat exchanger c/58 brand cards with 2 entry APV ¨
measuring 25 cm width/85 cm long.... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
