|
|
|
| Alfa Laval SHL 25 high-pressure piston homogenizer |
|
High-pressure piston homogenizer.
Manufacturer | Brand: Alfa Laval.
Model: SHL 25.
Maximum production capacity: up to 9,000 L/H at 250 bar pressure.
Refurbished.
Equipment with panel.
For the food, beverage, dairy, cosmetics, pharmaceutical, and biotechnology industries, among others.
Low- to high-viscosity, aseptic and non-aseptic emulsions and suspensions, including pasteurized milk, UHT milk, cream, yogurt, condensed milk, ice cream mix, fruit juices, concentrates, purées, tomato pastes, seasonings, mayonnaise, sauces, and dressings. |
Brand:
Alfa Laval
|
|
|
|
|
|
Main suggestions:
|
|
 |
Brand: Alfa Laval
Components: SEW-Eurodrive
Lobe pump in 316 stainless steel.
Manufacturer: Alfa Laval.
Motor: 7.5 Kw, manufacturer: Sew-Eurodrive.
Model: SRU4 / 055 / LS.
Year: 2017.
Voltage: 460 V.
Amperage: 12.30 A.
Three-phase.
Protection rating: IP 55.
R.P.M: 17... |
|
|
 |
Brand: Alfa Laval
Skid-mounted centrifugal separator for cleaning oils from hydraulic and other similar systems.
Manufacturer: Alfa Laval.
Maximum capacity: 10.6 m³/h, depending on the product.
Model: MAB 206.
The equipment was recently overhauled and skid... |
|
|
 |
Brand: Alfa Laval
Bactofugal vertical centrifuge with automatic discharge for milk clarification.
Manufacturer: Alfa Laval.
Model: BB-10 HGV.
Approximate hydraulic flow rate: 10,000 L/H.
Approximate flow rate for bacteria removal: 5,000 L/H.
Year: 2017.... |
|
|
 |
Brand: Alfa Laval
Components: SEW
Lobe pump in 316 stainless steel.
Manufacturer's brand: Alfa Laval.
Motor: 11 kW.
Year: 2011.
Internal diameter of product inlet/outlet: approximately 77 mm 78 mm. Check photos of the caliper.
Positive test for 316 stainless steel reag... |
|
|
 |
Brand: Alfa Laval
Components: SEW
Lobe pump in 316 stainless steel.
Manufacturer's brand: Alfa Laval.
Motor: 7.5 kW.
Internal diameter of product inlet/outlet: approximately 46 mm 48 mm. Check photos of the caliper.
Positive test for 316 stainless steel reagent. Check pho... |
|
|
 |
Brand: Alfa Laval
Plate heat exchanger.
Stainless steel.
Brand: Alfa Laval.
Model: M3 - FHC.
Maximum working pressure: 1.0 MPa / 10.0 Bar.
Maximum working temperature: 110 ° C.
Volume: 3 L.... |
|
|
 |
Brand: Alfa Laval
Alfa Laval sanitary transfer pump
- Pontecia: 7.5 hp - 3 phases.
- Voltage: 220/380 V.
- A 19.1 / 11.1
- Hz 60
- 3,500 rpm... |
|
|
 |
Brand: Alfa Laval
Stainless steel cooling tank.
Brand: ALFA LAVAL.
Approximate capacity: 1000L.... |
|
|
 |
Brand: Alfa Laval, Tetra Pak
Stainless steel sanitary valve manifold cluster.
Composed of:
- 12 Mixproof valves | double seat valves.
Manufacturer | brand: Alfa Laval.
Mixproof valves or double seat valves are special sanitary valves used to keep two liquids complete... |
|
|
 |
Brand: Alfa Laval
System for heating thermal fluid.
Brand: Alfa Laval, Aalborg.
Model: 25 - HO- 25M.
Year: 2009.
Thermal capacity: 2,500 Kcal / Hour.
Volumetric capacity: 2175 liters.
P.M.T.A: 150 Psig.
Hydrostatic Test: 225 Psig.
Category: 3.
... |
|
|
 |
Brand: Aalborg, Alfa Laval
Heater for industrial heating thermal fluid.
Brand: Alfa Laval Aalborg.
Model: 50 - HO - 50 M.
Process: Thermal fluid heater for propane refining.
Thermal capacity: - 5,000,000 KCAL/H
Volumetric capacity: 2960 Liters.
P.M.T.A - 300 ... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifugal pump.
Manufacturer | Brand: Alfa Laval.
Model: CRX 216 F.
Type: Sanitary.
Approximate flow rate: up to 10 m³/h.
Operated for 10 years.
Outlet: 2”.
The pump was used for transferring inverted sugar.
... |
|
|
 |
Brand: Alfa Laval
Horizontal stainless steel centrifuge separator for separating solids and liquids in food processes.
Manufacturer | brand: Alfa Laval.
Model: NX - 418.
Approximate capacity: 10,000 liters per hour.... |
|
|
 |
Brand: Alfa Laval
Separator centrifuge separator purify industrial oils.
Manufacturer | brand: alfa laval.
Model: mab 104.
Approximate capacity: 2,200 liters per hour.
To separate fine solids and other impurities.... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifuge separator for separating animal blood phases.
Manufacturer | Brand: Alfa Laval.
Model: BPM 209.
Approximate capacity: 5,000 liters per hour.
For separating plasma and hemoglobin.... |
|
|
 |
Brand: Alfa Laval
Centrifugal separator for industrial oils.
Manufacturer | brand: Alfa Laval.
Model: MOPX 205.
Approximate capacity: 4,900 liters per hour.
For separating fine solids and other impurities.
With panel.... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifuge for food processing such as juice, beer and wine production.
Manufacturer | brand: Alfa Laval.
Model: VNPX.
Approximate capacity: 2,400 liters per hour.... |
|
|
 |
Brand: Alfa Laval
Automatic centrifugal separator.
Manufacturer: Alfa Laval.
Model: MAPX-207.
With heater, vacuum pump, mug filter, 220 / 380 / 440 V transformer, control panel and waste tank.
For treatment of mineral oils in purification, clarification, d... |
|
|
 |
Brand: Despurifil
Industrial Reverse Osmosis Water Purification System.
Manufacturer | Brand: Despurifil.
Model: DES-806.
Approximate production: up to 8,000 liters.
Permeate production: 65%.
Inlet water conductivity: around 130 µs/cm.
Outlet water c... |
|
|
 |
Brand: Alfa Laval
- Transfer pump in stainless steel.
Type Sol 10c2.
- B 190 mm.
- Brand: Alfa Laval.
... |
|
|
 |
Components: Alfa Laval
316 L stainless steel reactor with internal electrostatic polishing.
For viscous products.
For batches up to 12 tons, depending on the product density.
Internal part stainless steel 316 L electrostatic polishing.
Model: RD 100 - P120 - 15... |
|
|
 |
Brand: Alfa Laval
Industrial centrifuge.
Brand: Alfa Laval.
Model: FESX - 512.
Capacity: 90 m³ / h.
Centrifuge for cornstarch, cassava, alcohol.
Quantity: 2 units.... |
|
|
 |
Brand: Alfa Laval
Total area: 6213.00 m ²
built-up areas:
-milk reception platform: 77.20 m ²
-physical-chemical Laboratory: 14.56 m ²
-Microbiology Laboratory: 7.00 m ²
-manufacturing of cheese: m ²
156.60-circulation area: 36.34 m ²
-salting Chamber:... |
|
|
 |
Brand: Alfa Laval, Ata
fermenteira 01 1500 l with reg. 2
01 fermenteira 1000 l with reg. 2
01 fermenteira 500 l with reg. 2 02 sanitary pumps 2hp/2
01 strip 2
01 alfalaval expansion tank with NG 2 s/refrig unit. (740L)
01 reception tank 300 l with reg. 2 with lid... |
|
|
 |
Brand: Alfa Laval, KHS, Spirax Sarco
Components: Danfoss
COLD SYSTEM
BEVERAGE CHILLING UNIT;
INDIRECT EXCHANGE (ammonia heat exchange with the
solution, ethanol water; heat exchange solution with the drink). This equipment allows the CIP the
hot in the changing room next to the drink. is a KHS EQ... |
Others suggested equipment for you:
|
|
 |
Stainless steel tank.
150 litre capacity.
no motor.... |
|
|
 |
Brand: Claumaq
Mixer.
Brand: Claumaq.
Stainless steel internal tank, shaft and spatula
Capacity: 100 kg.
Measures: 1.80 m x 1.00 m x 1.54 m.
... |
|
|
 |
Brand: IMSB, Rodopac
Automatic Capper with 6 nozzles.
Manufacturer: IMSB.
Model: TSB 25.06
6 Nozzles.
Measures 40 mm: 1.50 mm x 1.20 mm x 2.30 mm height.
Bondone and thread plastic bottles of 850 ml.
Capacity of 150 bottles per minute.
Weight 1,100 kg.
... |
|
|
 |
Ribbon Blender stainless steel
Brand: Uniâo Caldeiraria.
Stainless steel machine.
With equipment support.
It has cover with holder and security sensor.
With panel, motor and reducer.... |
|
|
 |
Brand: Promaler
Intermittent rotary cellofanching machine.
Brand: Promaler.
Prepared to operate fully closed cartridges.
Tape application with the following dimensions: 36 mm wide x 15 mm deep x 67 mm high.
Machine can be formatted for cigarettes, haysta... |
|
|
 |
Brand: Km
- Electropneumatic Batoqueira
- Brand: Km machines.
- Model: (BA002)
- Made of stainless steel. Semiautomatic equipment, allows pressure adjustment, has counter parts, column with height
adjustable.
- Machine of easy handling and low ... |
|
|
 |
Brand: Jormary
Container with 1 container nozzle.
Brand: Jormary.
Model: ES1 Plus.
Stainless steel equipment, polished, including inside the lung funnel, facilitating hygiene.... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: Martinez taboada
Filling machine for vials and flasks with stopper.
Brand: Martinez Taboada.
Model type: Ife 77.
Makes up to 30 ml.
Year: 1979.... |
|
|
 |
Brand: Posimat
Positioner from plastic bottles.
Brand: Posimat.
Model: Master-20.
Serial: 8764-MXI.
Uses all kind of bottles either light or heavy, cylindrical, oval or asymmetrical, with short necks or even without a neck, as covers plans elements ... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
Refining mill with 3 cylinders, 600 mm wide.
Brand: G.Mazzoni.
With equipment control panel.
Approximate dimensions:
Length: 720 mm Useful: 600 mm.
Diameter: 250 mm.
Engine: 20 HP.... |
|
|
 |
Brand: Martinez taboada
Rinsers of flasks.
Brand: Martinez Taboada.
Makes up to 30 ml.
type Model. IFE 77.
Year. 1979.... |
|
|
 |
Brand: Niva Pack
Components: Allen-Bradley
Vertical powder packer with volumetric system
Brand Name: Niva Pack.
Model: Absolut 350.
With pneumatic system of dosage of trough.
Machine with shape and thread.
Electric panel.
Allen Bradley PanelView 300 Micro Vision Panel.
Al... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
Homogenizer for soaps with 3 cylinders.
With fine pressure adjustment.... |
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Brand: Indumak
Components: Atos, Festo, Siemens, WEG
Vertical powder packer with helical dosing system
Brand: Indumak.
Model: MG 8000.
With thread, dosing system and format.
With panel.
System of vision Acts series interactive.
Inverters Weg CFW 08.
CLP Atos MPC 4004.
Servo driv... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
G.Mazzoni soap extruder intermediary.
- To extrude soap and preliminarily homogenize the dough.
- With 300 mm thread and cutting system.
- Measure 2,10 in length x 1,30 in width.... |
|
|
 |
Brand: Mesal
Filling machine 10 nozzles for wax grease high viscosity.
Brand: Mesal.
Model: MEC 500/10.
Year: 2002.
Worked with domestic wax packaging.
With 10 nozzles, individual cylinder per nozzle.
With electric panel.
Production: 5,000 bo... |
|
|
 |
Tank insulated with refrigeration, internal in stainless steel and external in carbon steel.
Capacity of 1,300 liters.... |
|
|
 |
Stainless steel storage tank.
500 liters capacity.
With carbon steel support.
Output of the product from the side.
With motor and propeller shaft.... |
|
|
 |
Brand: Treu
Masseira pony mixer.
Machine with panel and mechanical components.
Brand Name: Treu.
Manufacturer description: Rotary hopper mixer.
Capacity informed on the plate: 400/500 L.
With motor for automatic opening of the top cover.
With c... |
|
|
 |
Stainless steel tank with 1,500 liters with motor and reducer.
- Tank size 1,20 x 1,20 x 3,14 x 1,40: 4 = 1582 liters = 1500 liters.
- Engine of 5vc 1725 rpm.
- Motor of 220 v / 380v / 440 v.... |
|
|
 |
Coater in stainless steel tablets.
Type: Drageadeira.
With retractable head.
For approximately 150 L.
With two spray coating.... |
|
|
 |
Brand: Jones
Press Jones and conveyor belts... |
|
|
 |
Brand: Promáquina
Components: CompAir, Danfoss, Nivetec, NTG, Starnox, WEG
- Complete packaging for pharmaceutical industry.
- Machine built in stainless steel.
- To pack medicine with droppers and cap.
- Complete system for:
- Feed the liquid, with lung tank and agitator to avoid decantation.
- Pump for the ... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
