|
|
|
| Jacketed tank for 1,500 L |
|
Jacketed tank for 1,500 L.
It was once used as a tank to melt chocolates.
Carbon steel equipment.
Steam circulation.
Dimensions:
Diameter: 2 M.
Height: 2.20 m
Total height: 2.50 m. |
|
|
|
|
|
|
|
Main suggestions:
|
|
 |
Brand: Recinox
Components: SEW-Eurodrive
Jacketed hot reactor tank for water circulation.
Estimated total volume: 45.000 L.
Has jacket and thermal insulation.
With motor, reducer and blade shaft.
With control panel and frequency inverter.
With temperature sensor.
Equipment... |
|
|
 |
Stainless steel jacketed tank for cheese production.
Approximate capacity: 1500 liters.
For the dairy industry.... |
|
|
 |
Stainless steel jacketed tank for cheese production.
Approximate capacity: 1500 liters.
For the dairy industry.... |
|
|
 |
Brand: Incal
Line for emulsification processing, homogenization of condiments such as mayonnaise, ketchup and mustard.
Geiger type food processor.
Composed by:
- Processor emulsifier coated in stainless steel with sanitary finish.
Manufacturer: Incal.... |
|
|
 |
Components: Cestari, WEG
Jacketed reactor stainless steel tank with mixing system.
Reactor tank for viscous foods, human cosmetics and pet cosmetics, sanitizing products and other products and industries that work with 304 stainless steel.
Approximate estimated total v... |
|
|
 |
Brand: Ricefer
Jacketed tank for electric heating.
Brand: Ricefer.
With electric heating system, two resistances.
With control panel, frequency inverter for motors, temperature control by sensor in the tank.
Two stirring systems.
Main system with sid... |
|
|
 |
Benchtop mixing reactor tank heated by jacket and electric resistance.
Approximate total volume: 28.9 L.
Internal dimensions:
Internal height: 300 mm.
Diameter: 350 mm.
Benchtop reactor for cosmetics, food, chemical and other applicati... |
|
|
 |
Components: WEG
Stainless steel pressure reactor.
Capacity: 1,100 L.
Jacked tank.
With motor, reducer, shaft and propeller.
Extra space for inserting accessories, bottom (with black screw-on cover photo 20)
304 stainless steel.
Conical bottom.
O... |
|
|
 |
Jacketed stainless steel pressure reactor.
With motor, reducer and scraper shaft.
Approximate capacity: up to 200 liters.
For mixing homogenization of products such as cosmetics, chemicals, among others.
Equipment internally in stainless ... |
|
|
 |
Brand: Despurifil
Industrial Reverse Osmosis Water Purification System.
Manufacturer | Brand: Despurifil.
Model: DES-806.
Approximate production: up to 8,000 liters.
Permeate production: 65%.
Inlet water conductivity: around 130 µs/cm.
Outlet water c... |
|
|
 |
Stainless steel reactor jacketed mixing tank.
Total volume: 2,000 L.
Features.
Internal body in 2.5 mm sheet metal and external in 1.5 mm sheet metal.
ASME 2:1 torispherical top and bottom.
Polished sanitary internal finish and brushed... |
|
|
 |
Stainless steel tank with 1,500 liters with motor and reducer.
- Tank size 1,20 x 1,20 x 3,14 x 1,40: 4 = 1582 liters = 1500 liters.
- Engine of 5vc 1725 rpm.
- Motor of 220 v / 380v / 440 v.... |
|
|
 |
Brand: Topp Inox
Components: STM
Hermetic reactor, jacketed tank in 316 stainless steel with electric resistance heating system for the production of cosmetics.
Manufacturer: Topp Inox.
With two agitation systems on top, scrapers and agitator.
With turbo shearer on the bott... |
|
|
 |
Brand: Alsop
Stainless steel tank with simple jacket without mixer.
Brand: Alsop.
Capacity 200 liters.
Approximate measurements:
Tank height: 74.5 cm.
Height feet: 96.5 cm.
Diameter: 62 cm.... |
|
|
 |
Brand: Fabrima, Masipack
Components: WEG
Packer Fabrima manufacturer, model year 2008 ARV for packaging of powder with low fluidity, sugar, gelatin, grated cheeses, among others in flexible packaging.
features: package dimensions: 180 mm width for maximum length of 320 mm.
-Feeder: Fe... |
|
|
 |
Brand: Cetro, Lilla
Line for making coffee.
To produce roasted and ground coffee, vacuum coffee and espresso coffee.
Line composed of:
- Coffee roaster.
Manufacturer: Lilla.
Approximate capacity: 80 kg every 7 minutes.
With automatic PLC.
- Three si... |
|
|
 |
Brand: Recinox
Autoclave for fermentation of sparkling wines and alcoholic beverages.
Manufacturer brand: Recinox.
Model: FR.A - 5000 Vase III.
Capacity: 5,000 L.
Quantity of equipment: 3 units.
Standard of Fab Asme VIII Div.I.
Stirrer Motor 3 CV ... |
|
|
 |
Brand: Kroma
Infuser jacketed mixing tank.
Useful capacity: 1,200 L.
Manufacturer brand: Kroma special equipment.
Year: 2020.
Infusion tank for syrups and infusions.
Product: syrups and infusions
Maximum Density Considered: 1,000 Kg/m³
Maximu... |
|
|
 |
Spherical pressure tank for 350 L
Tank jacketed to work with steam.
Output the product at the bottom of the pan.... |
|
|
 |
Stainless steel reactor 1250 l.
thick Plate with agitator and reducer.
With support for fixing on mezzanine.
Body and stainless steel shaft first.
Outer jacket in carbon steel.
Diameter: 1 m
height: 1.60 m.... |
|
|
 |
Brand: Masipack
Components: WEG
1-MACHINE for PRODUCTION of CHOCOLATE ICING, COMPOSED of:
2 encamisados Tanks and carbon steel cap. 1200 litres.
1
chocolate pump dägua pump
refiner Mill (sphere), 25 engine HP
2 COBRIDEIRA Fab. Argentina
Blower with temperature controlle... |
|
|
 |
Brand: Kleber Weber
Milk cooling tanks.
Brand: Kleber weber.
7 units of equipment for 2,000 L.
8 units of equipment 3.000 L.
With jacket and attached cooling unit.
In stainless steel.... |
Others suggested equipment for you:
|
|
 |
Stainless steel tank.
150 litre capacity.
no motor.... |
|
|
 |
Storage tank.
Capacity: 2,300 liters.
Storage tank stainless steel.... |
|
|
 |
Stainless steel tank with mixer and simple.
1400 litres capacity.... |
|
|
 |
Brand: Incal
1 Pot for making chikki and other candy.
Brand: Incal.... |
|
|
 |
Stainless steel storage tank.
500 liters capacity.
With carbon steel support.
Output of the product from the side.
With motor and propeller shaft.... |
|
|
 |
Brand: Alfa Laval
Alfa Laval sanitary transfer pump
- Pontecia: 7.5 hp - 3 phases.
- Voltage: 220/380 V.
- A 19.1 / 11.1
- Hz 60
- 3,500 rpm... |
|
|
 |
Brand: Inoxil
- Pressure reactor in stainless steel 316 L with agitator and homogenizer.
- Literature capacity: 140 liters.
- Brand: Inoxil.
- Pressure equipment used for the manufacture of cream, ointment
And similar products.
- It has two engines... |
|
|
 |
Brand: Tirelli
Linear filling with 4 nozzles.
Brand: Tirelli.
Model: GVJA.
Machine to work on speed.
Imported equipment, great condition, has little time before their date of manufacture.
Sell the Tirelli labeller who was from the line (fillin... |
|
|
 |
Brand: Tirelli
Imported Italian bottling line, threading and labelling, consisting of:
-stainless steel pneumatic linear Tirelli Filling with 4 nozzles.
Model: GVJA.
-Rosqueadora stainless steel bottles, flasks for pneumatic Tirelli.
Model: NEBEL 2 t.... |
|
|
 |
Chocolate jacketed tank.... |
|
|
 |
Tank insulated with refrigeration, internal in stainless steel and external in carbon steel.
Capacity of 1,300 liters.... |
|
|
 |
Brand: Imarvil
Simple shirt tank in stainless steel and with mixer.
500 liters capacity.
Brand: Irmavil.... |
|
|
 |
Brand: Implantação Engmaq
Stainless steel tank with serpentine.
Brand: Implantation Engmaq.
Capacity: 35 liters.
Area: 0,30 m2.
Pressure Design: Side / Serpentine - 3/5 Bar / man.
Design temperature: Side / Serpentine - 80/80 C.
Operating pressure: Side / Se... |
|
|
 |
Stainless steel tank with lid.
100 litre capacity.
no motor.... |
|
|
 |
Brand: Rodrinox
- Tank with a maximum capacity of 1000 liters.
- Brand: Rodrinox.
- Dimensions:
- 2.00 m high.
- 1,00 m in diameter
- 0,50 m support (feet).
- Material stainless steel 316
- With tapered bottom.
- Output of the lower part.... |
|
|
 |
316 L stainless steel column shaker.
With engine.
It has no agitator.
Approximate dimensions:
Total height: 2050 mm. (photo 8)
Height to rod fitting: 1640 mm. (photo 9)... |
|
|
 |
Brand: Plumat
- Transfer pump in sanitary stainless steel.
- Brand: Plumat.
- Manufacture: German.
- q 7.8 m 3 / hr.
- 44.57 m.
- Power: 5.5 Kw - n 2,900 min.
- 2 m 2.... |
|
|
 |
Brand: Alfa Laval
- Transfer pump in stainless steel.
Type Sol 10c2.
- B 190 mm.
- Brand: Alfa Laval.
... |
|
|
 |
Brand: Netzsch
- Transfer pump with helical axle for liquid and pasty product.
- Stainless steel interior.
- With motor and reducer.
- Origin: multinational pharmaceutical industry.... |
|
|
 |
Brand: Rodrinox
- Handling reactor.
- Brand: Rodrinox.
- Pressure equipment used for the manufacture of cream, ointment
And similar products.
- It has motor with reducer.
- Spindle shaft.
- Great construction.
- 316 stainless steel.
- Capacity ... |
|
|
 |
Brand: Inoxil
- Storage transfer tank.
- Nominal capacity: 0.14 cubic meters.
- Brand: Inoxil.
- Capacity: 140 liters.
- part number: R.13.179-03
- AISI 316/304.
- Weight 105 kg.
- 120 degree pressure.
- Test pressure 3.9 kcal.
- Year 20... |
|
|
 |
Stainless steel tank for pallet truck transport.
It has a built-in pallet for movement.
Approximate capacity: 950 liters.
Approximate internal measurements:
Diameter: 1100 mm.
Height: 1000 mm.
Approximate outside measurements:
He... |
|
|
 |
Molten chocolate tank in stainless steel.
Works with electric resistance.
Features scraper.
Equipment for working around 25 kg.... |
|
|
 |
Pressure reactor in stainless steel.
Type bioreactor.
In great condition.
Capacity 200 liters.
Measures:
Height: 2,10 m.
Width: 0.85 m.
Length: 1,50 m.
With temperature sensor.
With inputs for oxygen sensor, PH and other in... |
|
|
 |
Stainless steel tank with mixer ...
2400 litres capacity.... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
